Bee flying with trail | Bumble Bee

Available size	Cost	Quantity
Wall Posters (1 feet single side shaped)	₹90
Ceiling Hanging (1 feet double sided shaped)	₹120
2 ft Cut out (Hard Board shaped)	₹580
3 ft Cut out (Hard Board shaped)	₹1305
Wall Posters & Ceiling hangings : These made of 300 gsm artboard paper - Standard thick wedding card paper Hardboard shaped cutouts : These are made of 4 mm thick foam board and can stand with support. Stands and balloons are NOT included.

Baby Name

Which Birthday is it?

Your Notes

Estimated Delivery Date

PRODUCT DESCRIPTION

Made of artboard or foam board based on size
Text to be customised wherever applicable
Text to be customised can be mentioned in the notes section.
Does not come with a stand or frame to hold it up
Refer "How do I setup?" section below to make your own stands

DEIVERY ESTIMATES

Description

Description	Shaped foam board / art board cutouts that are sturdy and reusable. Balloons and stands are NOT included.
Customization	You can add your kids name and if possible a small snippet of text to the design. Please mention the required customization in the notes text area provided.

What size should I buy?

House parties	We recommend going in for ceiling hangings and 1 feet wall cutouts for the hall / room where the decor is required. For the entrance cutout which will be placed at the door of the house we recommend using a 2 feet cutout.
Small hall / large house	Small party halls would require 2 feet cutouts inside the venue or garden and 3 feet cutouts at the entrance
Big parties	Large venues require bigger cutouts, 2-3 feet inside the venue and 4 feet cutouts at the entrance

How are these packaged before shipping?

How do we pack cutouts :Cutouts larger than 1 feet are folded like a book as shown in the image below. The packaging that we use also includes a wooden MDF board to prevent folding of the package so no damage comes to the cutouts. When you open it a small piece of cellotape or a few drops of super glue is sufficient to make the fold stay straight.

How do I setup?

Depending on the size and venue the cutouts can be setup differently.

Ceiling hangings These come with a ribbon attached so they only need to be tied or stuck to the ceiling using cello tape.

Cutouts

Metal stands The best option will be to use pre-fabricated metal stands like the one shown below. The cutouts can be stuck to these stands using double side tape. The base of the stand need to be heavy to prevent winds from blowing the stand down.
Makeshift stands Where there is no wind, these can be made to stand using a photo frame setup like shown in the image below. The back stand can be made using 1 inch thermocol which can be stuck to the cutout using bell pins. This is ideal for 2 feet cutouts in an enclosed halls.
Garden/outdoor venues Use a 5 feet tall - 1/2 inch PVC pipe and root it to the ground. Use double side tape to stick the cutout to the PVC pipe. If the ground is tiled/floored use a flower pot to root the pipe. When using flower pots you need to strategicly place the pot so that it blends in seamlessly - like near a pillar or on a walkway.